These ATV carriers

If you want to haul your ATV but don't want the problems of pulling a trailer, the Versa-Haul atv carrier is the ultimate solution. The Versa-Haul is an ATV carrier which mounts using your vehicle's class 3 or 4 two-inch receiver hitch. Simply roll your quad up the carrier's ramps and use straps to secure. The optional ramps store right on the carrier. Your 4 wheeler rides safely behind your vehicle. Great for trucks, SUV's, vans, motor homes, or any hitch carrying vehicle. Light duty suspensions may require air shocks or helper springs to avoid rear end sag.

Click pictures below to enlarge

Features: Fits any class III or IV hitch Powder coat finish Easily stores away Boxed for UPS shipping 700 lb carrying capacity

What's Included: Two 10 inch x 71.5 inch carrier tracks 2 inch x 2 inch x 57.5 inch holding shaft 2 inch x 2 inch x 57.5 inch holding shaft Two rail stops Two reflectors One loading ramp kit (RO model only)

Limitations: Carrier carrying capacity: The VH-90 atv carrier is designed to safely carry 700 lbs. Hitch weigh limit: Most Class III hitches are rated for 500 lbs. Most Class IV hitches are rated for 1000 lbs, check your hitch for your tongue weight rating Vehicle hauling capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load, check with your vehicle manufacturer. NOT recommended for 5th wheel trailers

Model #	Description	Weight	Picture (click to enlarge)	Price
VH-90	ATV & cart carrier without Ramps	116 lbs.		+40s&h
VH-90RO	ATV & cart carrier with Ramps	153 lbs		+50s&h
VH-TK	ATV Carrier Taillight Kit (click here for more info)	1 lbs.		Free s&h w/ carrier
VH-Strap	Includes: 2 heavy duty 1" wide x 6' foot long ratchet straps.  2 heavy duty 1" wide x 6'  long cam buckle straps. 1200 lb. capacity in black (Click here for more strap info)	6 lbs.		+8 s&h
Basic	Includes: Same high quality straps as above and 4 soft loops to prevent scratching your cycle. (Click here for more strap info)	6 lbs.		+8 s&h
VH-HR2	5" hitch riser for class II trailer hitch	8 lbs.		+10 s&h
VH-HR3	4" hitch riser for class III trailer hitch includes anti-tilt locking bracket	11 lbs.		+10 s&h
VH-070-HD	Heavy Duty anti-tilt locking device for class III or larger trailer hitches. Pinches main tube of rack tight into trailer hitch to eliminate rocking (included with all carriers)	2 lbs.		Free s&h

Click here to see ourmotorcycle carriers

Features:

• No drilling, cutting, soldering, or taping
• Easy do it yourself instruction included
• Easy stick on taillights
• Easy snap together connectors
• Each taillight kit model is pre-cut to length

What's Included:

• Two taillights
• Two cord clips
• Split flexible tubing
• Split wiring harness