|
This snowmobile loading ramp allows you to load your snowmobile on a pick-up truck or trailer with just one person. This ramp has many features designed just for loading a snowmobile on a truck or trailer. Integrated channels in the side ski ramps allow your skags or carbide runners to track straight up the ramp every time. The center section is for your track and is 16 inches wide and has a full width attaching lip and an adjustable cam buckle safety strap to secure the ramp to the trucks bumper or to the trailer. The side sections each have a steel adjustable safety cables to keep them in place. All aluminum construction means it will not rust and when the sections are stacked and the strap can be used to hold them together and it can be stored in your truck bed, trailer or in your garage when not in use.
Click pictures below to enlarge
These 3 or 4 piece snowmobile loading ramps are the ultimate solution for loading your sled. these high quality lightweight ramps consist of a 16 inch wide center section for your track, and two 8 inch wide channels for your skis, and an optional traction plate is also available (and recommended). The real advantages to this ramp over other styles for snowmobiles are :
1) The ski channels allow your ski runners or carbides to fit right in the constructed channels and prevent the snowmobilefrom not going up the ramp straight.
2) The optional traction plate prevents the track from spinning when your skis are on the runners and the track is still in contact with the ground, this has traditionally been the biggest problem with loading snowmobiles on ramps. This traction plate is adjustable to fit in different lengths on the ramp and gives you positive hook up with your track every time.
3) This ramp has steel safety cables on the ski ramps and an adjustable cam buckle strap for the center section. These safety cables and straps prevent the snowmobile ramps from being pulled away from the truck when traction on the ramp is achieved. Safety cables and straps must always be used, when your track hooks up on the traction plate it naturally want to pull the ramp away from the truck and that is the advantage of having 4 heavy duty steel cables connected to your bumper.
4) Length and storability, this ramp is available in 82, 90 and 96 inch length which gives you a preferred loading angle for all heights of trucks. When the two 8 inch side sections are stacked on the 16 inch wide center section this ramp takes up minimal space in the truck bed or on the trailer and stores easily next to the sled.
Note: For Dual Runner Ski Carbides: please measure your carbide runner spacing and compare to the ski measurements before ordering.
| Part # |
Dimensions |
Load Capacity |
Weight |
DRC Low Price! |
| SM-9632 |
96" Long x 32" wide (16"center- two 8" ski sections) |
600 lbs. center + 600lbs sides |
53lbs. |
+75 s&h
Back Order Until March 15, '08 |
| SM-EXT |
36" Long x 16" wide |
NA |
8lbs. |
+10 s&h
Back Order Until March '08 |
| Name |
Description |
Price |
VH-Strap
 |
Includes: 2 heavy duty 1" wide x 6' foot long ratchet straps. 2 heavy duty 1" wide x 6' long cam buckle straps. 1200 lb. capacity in black. (Click here for more strap info) |
+8 s&h
|
HDMC-Strap
 |
Includes: 2 heavy duty 2" wide x 6' foot long ratchet straps. 2 heavy duty 2" wide x 6' long cam buckle straps. 1200 lb. capacity in black and 4 soft loops to prevent scratching your atv (Click here for more strap info) |
+8 s&h
|
|
|
